Configuring the Dollars on the Net Payment Card Driver

  1. Select the Enterprise, property, or revenue center, click Setup, and then click Payment Drivers.
  2. Insert a record, enter DOTN as the name, and then click OK.
  3. Double-click the record to open it.
  4. On the General tab, click the Import from a file link.
  5. Browse to [Drive Letter]:\MICROS\Simphony2\EgatewayService\handlers, select DOTNPayment.dll, and then click Open.
  6. Click the Configuration tab.
  7. From the Assembly/Class section, enter information in the following fields:

    Table 12-9 Assembly/Class Fields

    Field Description

    Description

    Enter a description for the payment driver (for example, Dollars on the Net Payment Driver).

    Display Name

    Enter the name of the third-party driver development company (for example, Shift4). This value appears in the Driver drop-down list.

    Driver ID

    Enter DOTN.
  8. From the Common Driver Properties section, enter 1 in the following fields:

    • Bank Identification Number

    • Batch Number

    • Merchant Number

    • Store Number

    • Terminal Number

    The values in these fields cannot be 0 (zero) or blank.

  9. From the Transport Service Properties section, enter information in the following fields:

    Table 12-10 Transport Service Properties Fields

    Field Description

    Batching Host

    Enter the IP address of the machine where the Universal Transaction Gateway (UTG) application is installed at the Hosting or Enterprise level. Refer to the third party driver development company for the appropriate value.

    Batching Host Port

    Enter 17476. Contact Shift4 to use a different port.

    Host Timeout

    Enter the timeout value in seconds. Setting the value to 0 (zero) equals no timeout. Do not leave this field blank.

    Primary Host

    Enter the IP address of the machine at the property that runs the UTG application. If you enter 0.0.0.0., the actual IP address of the workstation at the property is required when you set the override.

    Primary Host Port

    Enter 17476. Contact Shift4 to use a different port.
  10. From the Shift4 Driver Properties section, enter MICROS_SIMP2 in the VendorID field.

    This is the Interface Identifier that Shift4 uses to recognize the interface sending the message.

  11. Click Save.

Related Topics

Parent topic: Payments and Currency