Table of Contents
Advertisement
Chapter 3
ADT Pulse Enrollment
This section provides examples of two different methods for enrolling the
RC8325-ADT HD Camera into the ADT Pulse network. (1) The first method uses a
wired connection to enroll the HD Camera to a Pulse Gateway or TS Base panel via
the Pulse Portal or TS Installer App. (2) The second method uses WPS to wirelessly
enroll the HD Camera to a Gateway or TS Base panel via the ADT Pulse Portal or TS
Installer App. The WPS method is described beginning on page 12.
Using a Wired Connection to Enroll the Camera
1. Set up the camera, as described in the previous chapter.
2. Launch an Internet browser and log in to the Pulse portal or TS installer app.
3. Enter the Manage Devices screen using one of these methods:
•
For the Pulse portal, select the System tab and click Manage Devices.
•
For the TS installer app, click the Pulse Devices link.
The Manage Devices screen displays.
4. In the Manage Devices screen, click Cameras.
5. Click the Add button at the bottom of the screen.
6. Locate the camera's MAC ID on the label on the rear of the camera.
RC8325-ADT Wireless Day/Night HD Camera Installation Guide
3
9
Hide quick links:
Advertisement
Table of Contents
