This is a
C This device is a Z-Wave control center. The device is controlled via webinterface. To find the devices IP address create an account at the miCasaverde homepage and click in the tab "Support" then "Setup" and "VeraLite". Include other devices to the Veras network in the menu "Devices" with "Add Device", then "Add Z-Wave Devices". Exclude devices using the menu "Devices" with "Add Devices", then "Advanced Z_Wave Devices", then "Remove one".
The miCasaverde Vera Lite is a consumer electronics device used for home automation. Vera Lite gateway communicates with electronic sensors and devices located throughout home using wireless and wired communications and connects to central portal server using existing broadband connection (Cable or DSL).
Internal Z-Wave interface module allows user to control Z-Wave sensors, appliance controls and automation devices.
Vera Lite integrates multiple complicated control, automation and internet protocols into one simple plug"n"play device. It provides a clear, consistent interface that allows user to manage home easily, whether at home, office or using mobile phone on the road.
The Vera Lite works with the MIOS Web-OS.
With the webinterface you can control actuators like dimmer, thermostats and electrical switches and you can see information and data from your sensors. Further information you can find directly on the website.
Reset to factory default | Vera Lite Setup -> Advanced -> Backup -> Restore Factory Defaults Alternatively you can reset the Vera Lite by pushing the reset button with a stick for at least 10 seconds. |
Inclusion |
Alternatively, for Inclusion and Exclusion of devices you can power the Vera with 4 x AA batteries. You can carry out the function directly near the device by using the hardware buttons on the Vera Lite. |
Exclusion |
Alternatively, for Inclusion and Exclusion of devices you can power the Vera with 4 x AA batteries. You can carry out the function directly near the device by using the hardware buttons on the Vera Lite. |
NIF | To send out a Node Information Frame type in the following line into your browsers address bar and replace the IP with the IP of your device:
|
Wakeup | XXXWakeupDescription |
Protection | XXXProtection |
FirmwareUpdate | XXXFirmwareUpdate |
SetAssociation |
|
As long as this device is not included into a Z-Wave network of a different controller it is able to manage its own Z-Wave network as primary controller. As a primary controller the device can include and exclude other devices in its own network, manage associations, and reorganize the network in case of problems. The following controller functions are supported:
Communication between two Z-Wave devices only works if both belong to the same wireless network. Joining a network is called inclusion and is initiated by a controller. The controller needs to be turned into the inclusion mode. Once in this inclusion mode the other device needs to confirm the inclusion - typically by pressing a button.
If current primary controller in your network is in special SIS mode this and any other secondary controller can also include and exclude devices.
To become primary a contoller have to be resetted and then include a device.
If the inclusion fails maybe it is already included in a different Z-Wave network. You can exclude the device and repeat the steps for inclusion.
The primary controller can exclude devices from the Z-Wave network. During exclusion the relationship between the device and the network of this controller is terminated. No communication between the device and other devices still in the network can happen after a successful exclusion. The controller needs to be turned into the exclusion mode. Once in this exclusion mode the other device needs to confirm the exclusion - typically by pressing a button.
Attention: Removing a device from the network means that it is turned back into factory default status. This process can also exclude devices from it's previous network.
Dimensions | 0.0120000x0.0100000x0.0040000 mm |
Weight | 320 gr |
EAN | 728028227765 |
Device Type | Static Controller |
Generic Device Class | Static Controller |
Firmware Version | 01.00 |
Z-Wave Version | 03.14 |
Certification ID | ZC08-10090001 |
Z-Wave Product Id | 008c.0001.0001 |
Frequency | Europe - 868,4 Mhz |
Maximum transmission power | 5 mW |