Owner's Manual - Universal Remote Control

Congratulations! 

Congratulations on purchasing Universal Remote 

Control’s WR7 7-Component Pre--Programmed 

and Learning remote control. You now have the 

power to control your entire home entertainment 

system with one easy--to--use remote. The WR7can 

be used with thousands of audio/video components 

because of the extensive library of codes that 

have already been programmed into the remote. 

So... get ready to sit back, relax, and simplify your 

home entertainment experience. 

This Owner’s Manual is designed to assist you in 

programming your WR7 remote to work with your 

components by guiding you through an easy stepby-step 

process. Everything you need to know 

about programming the WR7 is contained in this 

Manual. 

WR7 Owner’s Manual © 2008 Universal Remote 

Control, Inc. 

This document is protected by the copyright laws 

of the United States and internationally by the 

Berne Convention. No part of this manual may be 

reproduced in any form without the express written 

consent of Universal Remote Control, Inc. Although 

reasonable care has been taken to assure the 

accuracy of the information herein contained, 

Universal Remote Control, Inc. is not responsible 

for operational, technical or editorial errors or 

omissions. The specifications and information in 

this manual may be subject to change without 

notice. MacroPower and SimpleSound are 

trademarks of Universal Remote Control, Inc. 

Entertainment Made Simple ® is a registered trademark 

of Universal Remote Control, Inc. All other 

brand or product names are trademarks or registered 

trademarks of their respective owners. 

The Pioneer in Control Technology 

500 Mamaroneck Avenue, Harrison, NY 10528 

Phone: (914) 835-4484 Fax: (914) 835-4532 

Page 2

Table of Contents 

Getting Started - Overview 

• Control up to 7 Components ......5 

• Activating Component Buttons ....5 

• Learning Capability...................5 

• AUX Function............................6 

• Light Button...............................6 

• Battery Installation.....................6 

• Low Battery Warning.................6 

• Couch Mode ............................6 

Special Advanced Features 

• MacroPower & Other 

Macros ....................................7 

• “My Favorites” - Favorite 

Channels..................................7 

• SimpleSound & Other 

“Punch Throughs” ......................7 

Keypad Layout & Button 

Functions ........................8 

Programming WR7 Using 

Pre-Programmed Codes.....9 

• Quick Set-Up Method............9-10 

• Three-Digit Code Entry 

Method .............................11-13 

• Auto-Search Method ...........14-15 

Programming WR7 Using 

the Learning Method ..16-18 

AUX Function: Programming 

a 7th Component............19 

Finding a Component’s 

Set-Up Code Number ..19-20 

Page 3

Programming Special 

Advanced Features 

• MacroPower Total System 

On/Off ..............................21-22 

• “My Favorites” – Favorite 

Channels............................23-24 

• SimpleSound Total System 

Volume Control....................25-26 

• Channel Control 

“Punch Through”.......................27 

• Transport Control 

“Punch Through”.......................28 

• OSD (On-Screen Display) 

Control “Punch Through”............29 

Erasing Commands - 

Overview......................30 

• Erasing a Single Learned 

Command ...............................30 

• Erasing All Learned Commands 

from One Component...............31 

• Erasing MacroPower & Other 

Macro Commands ...................32 

• Erasing SimpleSound & Other 

“Punch Through” Commands......33 

• Factory Reset ...........................34 

Pre-Programmed Code 

Tables ..........................35 

• AUDIO ..................................36 

• CD ........................................37 

• VCR/DVR...............................38 

• AUX ......................................39 

• TV ....................................40-41 

• DVD ......................................42 

• CABLE/SAT ............................43 

FAQs ............................44 

Warranty ......................45 

Specifications ................45 

Page 4

Getting Started - 

Overview 

Control up to 7 Components 

The WR7 remote control is designed to 

control up to seven different Audio/Video 

components and operate virtually all 

brands of AUDIO, TV, DVD, VCR/DVR, 

CD, SAT/CABLE and AUX (Light, Music 

Server, etc.) components. 

Activating Component Buttons 

Once you have programmed the WR7 

for all of your components, all you need 

to do is press a component button and 

all the buttons on the WR7 will work with 

that component. For example, when you 

press the TV component button, all the 

buttons on your WR7 will operate your 

TV. If you press the DVD component button, 

all the buttons on the WR7 will operate 

your DVD. 

Each time you press any of the buttons 

on the remote, the LED light in the component 

button will light up to indicate 

which component you are controlling. 

TV BUTTON 

Learning Capability 

The WR7 has the ability to “learn” functions 

from the original remote controls of other 

manufacturers, even if they are not in the 

Pre-programmed database. 

Page 5

AUX Function 

The AUX (Auxillary) button is designed to 

operate a 7th audio/video component that 

you may have in your system… such as a 

TIVO, a second VCR or DVD, or an additional 

audio component. 

Light Button 

The WR7 features a fully backlit keypad for 

ease of use in low light or darkened viewing 

conditions. Press the LIGHT button to backlight 

all the keypad buttons. Press again to 

turn off (or simply wait 10 seconds for automatic 

shut-off). 

Battery Installation 

Press the tab and remove the cover of the 

battery compartment located in the back of 

your remote. Insert the two AA Alkaline batteries 

(included in the package) making sure 

to match the positive (+) and negative (- ) 

symbols as shown in the diagram. Place the 

cover back over the battery compartment. 

INSERT BATTERIES 

CORRECTLY 

Low Battery Warning 

When the batteries are low and need to be 

replaced the component LED will quickly 

blink three times when you press the 

POWER [ON] button. 

Couch Mode 

The WR7 is designed to automatically turn 

itself off if a button is pressed for more than 

30 seconds. This prevents battery power 

from being depleted should the remote accidentally 

slip between the couch cushions. 

Page 6

Special Advanced 

Features 

The WR7 also offers the following special 

advanced features that can offer you many 

time-saving conveniences: 

MacroPower & Other Macro 

Buttons 

MacroPower is a unique feature that enables 

you to turn all your components ON or OFF, all 

at the same time, simply with the press of one 

button. The WR7 has 13 Macro buttons that 

are designed to store up to 20 commands in 

each button. Pressing any one of the Macro 

buttons will send out the series of commands 

that are stored in that button. 

“My Favorites” 

(Favorite Channels) 

This is one of the most desirable features of the 

WR7 remote control. Once it’s set up, you can 

select one of four favorite channels with the 

press of one button – without the need to type 

in a channel number. So, whether it’s CNN or 

the Food Network, your favorite viewing spot is 

just one click away. 

SimpleSound & Other “Punch 

Throughs” 

SimpleSound Volume Control is a dynamic feature 

that gives you total volume control over all 

the components in your system, even those that 

do not have their own built--in volume control, 

such as TIVO, DVD and VCR... saving you the 

hassle and inconvenience of constantly needing 

to switch between component modes on the 

remote. As an example, in order to increase the 

volume while watching a DVD, you would typically 

have to pick up the TV remote control to 

increase the volume. With the WR7, you do 

not even have to press the TV component button. 

Once you program SimpleSound in your 

DVD mode, you will automatically have TV volume 

control in DVD mode. 

SimpleSound is what is called a “Punch 

Through” feature and is not limited to volume 

control. It can also be applied to Channel 

Control, Transport Control, and OSD Control. 

Page 7

ON 

Allows you to turn the selected 

component on and off. 

AUD, CD, VCR, AUX, 

TV, DVD,SAT/CABLE 

Used to select the component 

you want to 

operate and signals 

remote control activity. 

INPUT 

Selects the video 

source from available 

components. 

PREVIOUS 

CHANNEL 

Returns to the previously 

tuned channel 

through the SAT/Cable 

Set Top Box. 

VOLUME 

Raises or lowers the 

sound volume. 

GUIDE 

Displays the Program 

Guide Listings provided 

by the Cable or Satellite 

Service Provider. 

MENU 

Displays the 

Applications Menu 

through the Cable 

Set Top Box. 

CURSOR NAVI- 

GATION PAD 

Used for programming 

steps and onscreen 

navigation 

and highlighting. 

TRANSPORT 

CONTROLS 

Perform standard 

VCR and DVD functions 

when in VCR 

and DVD mode, or 

VOD (Video-On- 

Demand) and DVR 

(Digital Video 

Recorder) functions 

when in Cable mode. 

MY 

FAVORITES 

Custom-programmable 

Favorite Channel Buttons 

Keypad Layout & 

Button Functions 

Page 8 

SYSTEM OFF 

Designed to send Power On/Off 

commands for up to seven components 

with one button press. 

FAVORITE 

Designed to send 

Power On/Off 

commands for 

up to seven components 

with one 

button press. 

LIGHT BUTTON 

Press to back-light all keypad buttons. 

Press again to shut off (or simply wait 10 

seconds for automatic shut-off). 

CHANNEL 

Selects the next 

higher or lower 

channel. 

MUTE 

Silences the Audio. 

Press to activate. Press 

again to restore sound 

to the previous level. 

INFO 

Displays information 

about the program 

currently playing or 

highlighted in the 

Program Guide (see 

GUIDE). 

EXIT 

Exits from current 

screen. 

SELECT 

Selects highlighted 

screen options. 

SKIP-/+ 

Skip forward or 

backward a 

whole day in the 

Program Guide. 

NUMBER 

PAD 

Use to enter code numbers 

for programming 

components and to enter 

channel numbers to tune 

in channels. Also used to 

make numeric entries 

on on-screen menus. The 

alpha labels on the keys refer 

to Audio component functions 

that can be accessed with the 

respective keys.

Programming WR7 using 

Pre-Programmed Codes 

There are three ways you can program your 

WR7 using the component brand codes that 

are pre-programmed into the remote. 

• Quick Set-Up Method 

• Three-Digit Code Entry Method 

• Auto--Search Method 

The Quick Set-Up Method is a unique new feature 

that enables the fastest and easiest set-up 

by using one-digit codes for up to 10 major 

brands for each component. The Three-digit 

Code Entry Method allows you to set-up the 

WR7 using 3-digit codes for component brand 

names. It is also a fast and easy way to program 

the remote. The Auto-Search Method 

scans through all the brands in the remote control, 

one at a time. It should be used when 

either the Quick Set-Up or Three-Digit Code 

Entry Methods do not work. 

* * * 

Quick Set-Up Method 

STEP 1: Manually or using your old 

remote, turn on the component you want to 

program—for example, to program your TV, 

turn on your TV set. 

STEP 2: Point the WR7 toward the component 

that you want to program (in this case 

the TV set) and press and hold the component 

button (in this case the TV button). 

While holding down the component 

button, begin to press numeric 

keys, one number at a time, starting from 1, 

continuing to 2, 3…0 until the component 

(in this case the TV) turns off. 

Page 9

STEP 3: Release the component button to 

save the code. The component LED light will 

blink three times to confirm that the code has 

been stored. 

Repeat the above steps for other components. 

COMPONENT 

BUTTONS 

NUMBER 

PAD 

Page 10

Three-Digit Code Entry Method 

STEP 1: Find the 3-digit code numbers 

assigned to your brand from the lists in the 

back of this manual. The codes are listed by 

component category (i.e., TV, VCR, DVD, 

etc.), then by brand name. For instance, if 

you would like to locate a code for a Sony 

television, first locate the TV category and 

then look for the Sony brand. 

STEP 2: Once you have located the 3digit 

codes for each of the components that 

you wish to operate with your WR7, write 

them ALL down on a piece of paper. It’s 

important that you write down all the codes 

listed for your brand because only one code 

is going to work with your component. 

STEP 3: Manually or using your old 

remote, turn on the component you want to 

program—for example, to program your TV 


STEP 4: On the WR7, press the 

Component button that you want to program 

(in this case the button that says TV) and the 

SELECT [SEL] button at the same time. Hold 

down both buttons for two seconds until the 

TV Component LED light turns on. This signals 

that you are in programming mode. 

COMPONENT 

BUTTONS 

SELECT 

BUTTON 

Page 11

IMPORTANT: You have 30 seconds to 

perform the next step while you are in programming 

mode. If you do not press a button 

within 30 seconds, the component LED 

light will turn off. The remote will exit the 

programming mode and you will have to 

start over. 

STEP 5: Point the WR7 toward the component 

(in this example the TV) and punch in 

the first 3-digit code that you wrote down for 

that specific component. Use the Number 

buttons 0~9 on the remote to punch in the 

code. The TV LED light will blink each time a 

number is pressed. 

NUMBER 

BUTTONS 

If the 3-digit code number you just punched 

in is the correct number, the component you 

are trying to program will turn off. If it did 

not turn off, enter the next code number 

from your list until it does turn off. 

STEP 6: Once you’ve entered the code 

number and the component has turned off, 

press the POWER [ON] button on the WR7 

remote to turn the component back on. 

Next test the VOLUME and CHANNEL buttons 

(or PLAY and STOP buttons for VCR and 

DVD) to make sure they all work. For example, 

perhaps your Sony TV turned off with 

code number 147, but the volume controls 

did not work properly. In this case, try the 

next code number listed for that component. 

Repeat Step 5 using the next code number 

until you find a perfect match. 

Page 12

STEP 7: Once you’ve entered a correct 

code, you must save it. Press the component 

button you just programmed (in this 

case TV) one more time to save the code 

number. 

The component LED light will blink three 

times to confirm that the code was successfully 

stored. Now when you press the TV 

component button, all of the buttons will 

work with your TV. 

Program the remaining components by 

repeating steps 3 through 7. 

IMPORTANT: If you have tried all the setup 

codes in the list and the component still 

did not turn off after Step 5, either the Auto- 

Search Method (page 14) or the Learning 

Method (page 16) will help you program. 

Page 13

Auto-Search Method 

The Auto-Search Method is a way you can 

scan through all of the codes in the table to 

find the right code for your component. 

STEP 1: Manually or using your old remote, 

turn on the component you want to program—for 

example, to program your TV, 


STEP 2: On the WR7, press the Component 

button that you want to program (in this 

case the button that says TV) and the 

SELECT [SEL] button at the same time. Hold 

down both buttons for two seconds until the 

TV Component button light turns on. This signals 

that you are in programming mode. 

IMPORTANT: You have 30 seconds to perform 

the next step while you are in programming 


within 30 seconds, the component LED light 

will turn off. The remote will exit the programming 

mode and you will have to start 

over. 

UP� 

ARROW 

DOWN� 

ARROW 

Page 14

STEP 3: Point the WR7 remote control 

toward the component and press the UP [� ] 

arrow (or DOWN [� ] arrow) button once. 

Each time the UP or DOWN arrow button is 

pressed, the code will count up (or down) one 

code number and send a Power OFF signal. 

When the correct code is sent out, the component 

will turn off. 

STEP 4: Once you have found the right code 

number and the component has turned off, 

press the POWER [ON] button on the WR7 

remote to turn the component back on. 

Next test the VOLUME and CHANNEL buttons 

(or PLAY and STOP buttons for VCR and DVD) 

to make sure they all work. If any of the buttons 

do not work properly, you need to find a new 

code. Continue pressing the UP (or DOWN) 

arrow button until you find a new code that 

turns off the component and makes the VOL- 

UME or PLAY buttons respond correctly. 

STEP 5: Once you have found the right 

code, you must save it. Press the component 

button you just programmed (in this case 

TV) one more time to save the code number. 

The component LED light will blink three times 

to confirm that the code was successfully stored. 

Now when you press the TV component button, 

all of the buttons will work with your TV. 

NOTE: Use this method for those components 

you cannot program with either the Quick Set- 

Up or 3-digit Code Entry Methods. 

IMPORTANT: If you cannot find the right 

code after 5 minutes of trying the Auto-Search 

Method, try the Learning Method (page 16). 

PLEASE DO NOT RETURN 

THIS PRODUCT TO THE STORE 

PLEASE CONTACT OUR TECHNICAL 

SUPPORT CENTER. 

IF YOU NEED ASSISTANCE E-MAIL 

techsupport@UniversalRemote.com 

or dial 1-800-901-0800 

(9:00AM - 6:00PM EST) 

Page 15

Programming WR7 using 

the Learning Method 

STEP 1: Line up the WR7 to the remote control 

you want to “learn” from, head--to--head as shown 

below. Start with both remotes’ IR windows touching 

(or nearly touching). 

STEP 2: On the WR7, press the Component 

button that you want to program (in this case 

the button that says TV) and the ENTER [ENT] 

button at the same time. Hold down both buttons 

for two seconds until the TV Component 

button light turns on. This signals that you are 

in programming mode. 



mode. If you do not press a button within 

30 seconds, the component LED light will 

turn off. The remote will exit the programming 

mode and you will have to start over. 

STEP 3: Press any button on the WR7 that 

you want to teach a command to. For example, 

if you want to teach the [MUTE] button on the 

WR7 the TV Mute command from the other 

remote, first press the [MUTE] button on the 

WR7 and the TV component button LED light 

will blink once indicating that the WR7 is ready 

to learn the command. 

Page 16

STEP 4: Press and hold the [MUTE] button 

on the other remote until the component button 

LED on the WR7 blinks twice. Now you 

can continue learning all other buttons from 

your old remote by pressing the next button 

on the WR7 and repeating this step. 

Note: The component LED will blink five times 

if there was an error in the learning process. In 

this case, please repeat Steps 3 and 4. 

STEP 5: Once the WR7 has learned all 

the buttons in the selected component mode, 

press and hold the Component button and 

ENTER [ENT] buttons at the same time to 

save the learned functions. The component 

LED light will blink three times to confirm the 

programming. Now test all the buttons to 

make sure they learned correctly. 

Repeat Steps 1-5 to program any other component 

modes. 

If the Learning Method does not 

work, here are a few suggestions: 

• If you have a Plasma TV, move to another 

room 

• Avoid programming under fluorescent light 

or direct sunlight 

• Put new batteries in the old remote 

• Gradually vary the distance between the two 

remote controls 

• Adjust the angles of the remotes (i.e., keep 

the WR7 on a flat surface while holding the 

other remote in hand and angling it down 

toward the WR7) 

• Tap the button on your old remote instead of 

pressing and holding it during the learning 

process 

Page 17

Here are some additional facts 

regarding the Learning process: 

• Learned functions override any existing preprogrammed 

functions on the remote control 

• Learned functions are automatically erased 

when a new function is learned on the same 

button 

• Learned functions are retained even after a 

different set-up code number is programmed 

into the remote control 

• To return to an original pre-programmed 

function, a learned function must be erased 

• Rapidly tapping the Volume Up button on the 

old remote will teach the WR7 to ramp the volume 

instead of raising it in increments of one 

Page 18

AUX Function: Programming 

a 7th Component 

After you’ve finished programming the WR7 for six 

primary components and you did not use AUX, you 

can take advantage of the AUX function to program 

a 7th component, such as a second TV, DVD, or 

any other audio/video component that you may 

have in your system. Simply program the [AUX] button 

in the same manner as any other component 

using either the Quick Set-Up Method, the 3-Digit 

Code Entry Method, the Auto-Search Method or the 

Learning Method. 

Finding a Component’s 

Set-up Code Number 

If you used the Auto--Search or Learning Methods 

to program a component, you may not know the 

code number you programmed. Here is a way for 

you to identify what that code number is, so you 

can make a note in the back of this Manual for 

future reference. 

STEP 1: Press the component button you 

would like to verify and the SELECT [SEL] 

button at the same time for two seconds until 

the selected component LED light turns on. 





light will turn off. 

The remote will exit the programming mode 

and you will have to start over. 

COMPONENT 

BUTTONS 

SELECT 

Page 19 

INFO

STEP 2: Press the [INFO] button and count 

the number of times the Component LED light 

blinks. This number indicates the first digit of 

the code. Next it will pause for about one second 

and begin blinking again to indicate the 

number of the second digit. Then once again 

it will pause, then blink, to indicate the number 

of the third digit. 

Example: One blink, pause, eight blinks, 

pause, three blinks indicates code number 183. 

Note that ten (10) blinks represent the number 0. 

Page 20

Programming Special 

Advanced Features 

Programming Multi-Commands to 

Macro Buttons 

The WR7 has 13 Macro buttons (ON, SYS- 

TEM OFF, 7 Component buttons, and 4 “My 

Favorites” buttons) that are designed to store 

up to 20 commands in each button. Pressing 

any one of the Macro buttons will send out 

the series of commands that are stored in 

that particular button. 

MacroPower Total System On/Off 

MacroPower makes several devices work together 

by pressing one button. Imagine the convenience 

of turning on your TV, your DVD player 

and your Surround Sound receiver by pressing 

a single button on your WR7. What could normally 

take three remotes and three button pushes, 

the WR7 can accomplish with the press of 

one button. We call that MacroPower. Any of 

the Power On or the System Off buttons can be 

programmed for MacroPower control. To set it 

up, follow these easy steps: 

STEP 1: To program MacroPower commands 

for the POWER [ON] button, press the POWER 

[ON] button and the [MUTE] button at the same 

time for two seconds until one of the component 

button LED lights turns on. 

POWER 

MUTE 

Page 21



mode. If you do not press a button within 30 seconds, 

the component LED light will turn off. The 

remote will exit the programming mode and you 

will have to start over. 

STEP 2: Press the component button you 

want to turn on and then the POWER [ON] 

button; repeat for all other components in the 

order you want them to turn on. The component 

LED lights will blink once each time you 

press the POWER [ON] button. 

POWER 

COMPONENT 

BUTTONS 

STEP 3: Once you’ve entered all the 

Power On commands, press the CHANNEL 

Up [CH� ] button to save your MacroPower 

commands. The component LED lights will 

blink three times to confirm that the programming 

has been successfully saved. 

SUGGESTION: Most of the components 

have the same signal to turn the power On and 

Off. You may want to program MacroPower 

only in the POWER [ON] button and save the 

[SYSTEM OFF] button to turn components On 

or Off individually. 

Note: If you want to program MacroPower 

for the [SYSTEM OFF] button, repeat the same 

steps used for POWER [ON] programming. 

Page 22 

CHANNEL 

UP�

Programming “My Favorites” - 

Favorite Channel Buttons 

In Cable mode, the four [MY FAVORITES] 

buttons are also designed to serve as dedicated 

Favorite Channel buttons. 

Each button will access one of your favorite 

channels with just one button press. Here’s 

how to program Favorite Channels: 

STEP 1: Press the [CABLE/SAT] button to 

select the Cable/SAT mode. 

STEP 2: Press one of the [MY FAVORITES] 

buttons and the [MUTE] button at the same 

time for two seconds until the [CABLE/SAT] 

component LED turns on. 







MY 

FAVORITES 

MUTE 

Page 23

STEP 3: Using the Number Pad, punch in 

the Channel number of the Favorite Channel 

that you want to store in the Macro button. 

The CABLE/SAT component LED light will 

blink once for each button pressed. 

STEP 4: Press the CHANNEL UP [CH� ] 

button to store the commands entered. The 

[CABLE/SAT] component LED will blink three 

times to confirm the programming. 

Notes regarding programming 

multi-commands to Macro buttons: 

• You can program up to 20 commands on 

each Macro button. 

• You can program delays in between commands 

by pressing the [PAUSE] button. 

Each press adds a one-half second delay. 

• Also, if you add the delay time as the first 

step of Macro commands, the remote will 

not send the Macro unless the button is 

held for two seconds. (This is the Press & 

Hold Function). 

• You can also program macro commands in 

“layers” by pressing the [STOP] button in 

between commands. (For example, if you 

press [009], [STOP], [035], [STOP], [365], 

[STOP] in Step 3 of the Favorite Channel 

programming process) the remote will send 

out 009 at the first press of the selected 

[My Favorites] button, and then send out 

035 at the second press, etc. 

• You cannot program the [CH� ] or 

[PAUSE] buttons as macro commands. 

Page 24 

CHANNEL 

UP�

SimpleSound Total System 

Volume Control 

SimpleSound is one of the most exciting features 

of the WR7. It gives you total volume 

control over ALL the components in your system, 

even those that do not have built--in volume 

control, such as TIVO, DVD and VCR. 

SimpleSound saves you the hassle and inconvenience 

of constantly switching between 

component modes just to control volume. 

First you should identify which device in your 

system will be used to deliver sound. In a 

basic system, the sound may come from your 

TV speaker. In a more advanced system, the 

sound may come from your audio components 

(such as a Surround Sound Receiver or 

Home Theatre system). 

Now, let’s set--up SimpleSound. Here’s how: 

STEP 1: Press and hold the button that corresponds 

to the Component you want to add volume 

control to (such as a DVD or VCR) and the 

SELECT (SEL) button at the same time for about 

three seconds until the component LED light 

turns on. 




30 seconds, the component LED light will turn 

off. The remote will exit the programming mode 


COMPONENT 

BUTTONS 

SELECT 

Page 25

STEP 2: Press the VOLUME UP [VOL�] button 

and then press either the TV or AUDIO component 

button that you want to use for volume. 

The Component LED light will blink three times 

to confirm that it is saved. This sets up three buttons 

(Volume Up, Volume Down and MUTE) as 

a group for that component. 

VOLUME 

UP� 

Repeat Steps 1-2 for all other components. 

Note: SimpleSound is what’s technically 

referred to as a “Punch Through” feature and is 

not limited to volume control. It can also be 

applied to other groups of buttons. If you find 

yourself switching to a particular component 

mode frequently to access a particular control, 

consider using Punch Through. 

Page 26

Channel Control “Punch Through” 

This “punch through” enables you to program 

the WR7 so that either the Cable or TV 

Channel Controls (CHANNEL UP, DOWN, 

LAST, CHANNEL NUMBERS 0-9, +10 and 

ENTER) will also operate in other component 

modes on the remote control. 

STEP 1: Press and hold the component button 

you want to add channel control to, such as 

[DVD] or [VCR], and the SELECT [SEL] button at 

the same time for two seconds until the 

Component LED light turns on. 








button. The component LED light will blink once. 

SELECT 

STEP 3: Press either the [TV] or [CABLE/SAT] 

button that you want to use as the source of 

channel control. The component LED will blink 

three times to confirm it is saved. 

Page 27 

COMPONENT 

BUTTONS 

CHANNEL 

UP�

Transport Control “Punch Through” 


the WR7 so that VCR or DVD Transport Controls 

(PLAY, STOP, FF, REW, PAUSE, SKIP and RECORD) 

will also operate in other component modes on the 

remote control. 


you want to add Transport Control to, such 

as [CABLE/SAT] or [TV], and the SELECT [SEL] 

button at the same time for two seconds until 

the Component LED light turns on. 







STEP 2: Press the [PLAY] button. The component 

LED light will blink once. 

STEP 3: Press either the [DVD] or [VCR] 

button that you want to use as the source of 

Transport Control. The component LED will 

blink three times to confirm it is saved. 

Page 28 

COMPONENT 

BUTTONS 

SELECT 

PLAY

OSD (On-Screen Display) Control 

“Punch Through” 


the WR7 so that CBL or DVD OSD Controls 

(MENU, GUIDE, INFO, EXIT, SEL and 4 

Cursor Controls) will also operate in other 

component modes on the remote control. 


you want to add OSD Control to, such as 

[TV] or [VCR], and the SELECT [SEL] button at 

the same time for two seconds until the 

Component LED light turns on. 







STEP 2: Press the [MENU] button. The 

component LED will blink once. 

MENU 

STEP 3: Press either the [CABLE/SAT] or 

[DVD] button that you want to use as the 

source of OSD Control. The component LED 

will blink three times to confirm it is saved. 

Page 29 

COMPONENT 

BUTTONS 

SELECT

Erasing Commands - 

Overview 

You can erase a single learned command, all 

learned commands in each component mode, 

SimpleSound programming, MacroPower commands, 

or re--set the remote to original factory 

default settings. 

Erasing a Single Learned Command from 

One Component 

STEP 1: Press the component button where 

the learned command is stored and the [ENTER] 

button at the same time for two seconds until the 

component LED light turns on. 



mode. If you do not press a button within 30 seconds, 

the component LED light will turn off. The 

remote will exit the programming mode and you 

will have to start over. 

STEP 2: Press and hold the button you 

want to erase for two seconds. The component 

LED light will blink twice to confirm the 

erasure. 

STEP 3: Repeat Step 2 to erase any other 

buttons in the selected component mode. 

STEP 4: To exit Erase mode, press and 

hold both the component button and the 

[ENTER] button at the same time until the 

component LED light blinks three times. 

Page 30 

COMPONENT 

BUTTONS 

ENTER

Erasing All Learned Commands from 

One Component 

This function allows you to erase all the 

learned commands from one component. 

For example, if you want to erase all 

learned commands on the TV component 

button because you bought a new TV, the 

process is very simple. 

STEP 1: Press the component button where 

all the learned commands are stored and the 

[ENTER] button at the same time for two seconds 

until the component LED turns on. 





light will turn off. The remote will exit the 

programming mode and you will have to 

start over. 

STEP 2: Press and hold both the component 

button you want to erase and the [PAUSE] button 

at the same time for two seconds, until the 

component LED light blinks twice to confirm 

the erasure. 

STEP 3: To exit Erase mode, press and 

hold both the component button and the 

[ENTER] button at the same time until the 

component LED light blinks three times. 

Page 31 

COMPONENT 

BUTTONS 

PAUSE 

ENTER

Erasing MacroPower & Other 

Macro Commands 

STEP 1: To erase MacroPower commands 

on the POWER [ON] or [SYSTEM OFF] button, 

press and hold either the POWER [ON] 

or [SYSTEM OFF] button and the [MUTE] 

button simultaneously for two seconds until 

the current status component LED turns on. 

IMPORTANT: If you don’t proceed to the 

next step within 30 seconds, the LED will 

turn off and exit set-up mode and you will 

need to start over. 


button to erase and exit Erase mode. The 

component LED light will blink three times to 

confirm the erasure. 

POWER 

ON 

MUTE 

NOTE: To erase other Macros, simply press 

the appropriate button in Step 1 in combination 

with the [MUTE] button. 

Page 32 

SYSTEM 

OFF 

CHANNEL 

UP�

Erasing SimpleSound & Other 

“Punch Through” Commands 

STEP 1: Press and hold the Component 

button you want to erase volume control 

from, such as DVD or VCR and the SELECT 

[SEL] button at the same time for two seconds 

until the Component LED light turns on. 

STEP 2: Press the VOLUME UP [VOL � ] 

button and the same component button from 

Step 1. The component LED light will blink 

three times to confirm the erasure. 

VOLUME 

UP� 

Repeat Steps 1--2 to erase SimpleSound 

commands from other components. 

NOTE: To erase other “punch through” commands, 

simply press the following buttons in 

place of VOLUME UP in Step 2: 

• For Channel Control, press: CHANNEL 

UP [CH� ] 

• For Transport Control, press: PLAY [�] 

• For OSD Control, press: [MENU] 

Page 33 

SELECT 

COMPONENT 

BUTTONS

Factory Reset 

You can reset your WR7 remote to the original 

factory default settings. 

Press and hold both the [TV] and RECORD 

[REC] buttons for about five seconds until the 

[CABLE/SAT] component LED light blinks five 

times. All programming and set-up codes that 

you have entered into the remote will be erased 

and the WR7 will return to the original factory 

default settings. 

Warning 

This procedure will erase all programming 

and set-up codes that you have entered 

into the remote. 

TV COMPONENT 

BUTTON 

RECORD 

Page 34 

SAT/CABLE

Pre-Programmed 

Code Tables 

The WR7 Pre-Programmed code library is classified 

by category (Audio, CD, VCR/DVR, etc.). 

Within each category, the code numbers are listed 

in rows by brand (Sony, Panasonic, B & K, 

etc.). Some brands have more than one threedigit 

code. 

Circle the correct row and refer to it while you 

perform setup operations. 

AUDIO 

CD 

VCR/DVR 

AUX 

TV 

DVD 

CABLE/SAT 

Amps, Preamps & A/V 

Receivers 

CD Players & Changers 

VCRs, DVRs & Combo Units 

iPod, Media PC, Gaming 

System, Lighting Controls 

TVs, Plasmas, Projectors & 

Monitors 

DVD Players & Recorders 

Cable Set Top Boxes & Satellite 

Receivers 

Page 35 

36 

37 

38 

39 

40-41 

42 

43

AUDIO 

Brand Code Numbers Brand Code Numbers 

ADC 007 

ADCOM 082 092 225 161 269 355 

356 

AIWA 170 018 104 202 203 213 

211 188 

AKAI 189 

AMC 125 126 127 281 282 

ANGSTROM 142 

ANTHEM 335 337 

ARCAM 141 418 

ATLANTIC TECHNOLOGY 342 

AUDIO FILE 071 

AUDIO MATRIX 167 

AUDIO TECHNICA 134 

B & K 096 097 

BOSE 070 170 224 347 409 460 

BOSTON ACOUSTICS 447 

BRIX 555 

CARVER 006 028 061 071 201 214 

226 185 022 077 284 

CINEMA SOUND 134 

CITATION 148 272 

CLARION 026 

DELPHI 515 

DENON 109 215 230 234 330 

001(Default) 801 

DVICO 802 

ELAN 057 290 

ENLIGHTENED AUDIO 099 098 

ESCIENT 368 451 

FISHER 047 214 182 297 

FLEXTRONICS 378 

FOSGATE AUDIONICS 231 342 

GE 056 

GOLDSTAR 008 

HARMAN KARDON 231 233 153 154 118 318 

HITACHI 020 

INTEGRA 275 781 

INSIGNIA 589 

JAMO 398 799 

JCPENNEY 216 

JENSEN 058 

JVC 163 191 114 279 291 

KENWOOD 026 066 145 192 182 005 

280 374 

KLH 331 

KOSS 216 

KRELL 072 376 384 

KYOCERA 007 

LEXICON 120 235 236 237 357 360 

LINN 124 377 

LUXMAN 139 052 165 115 004 009 

LXI 056 

MAGNAVOX 086 164 152 208 

MARANTZ 006 028 031 040 063 185 

479 251 265 119 289 

MCINTOSH 238 286 

MERIDIAN 100 012 013 

MITSUBISHI 242 243 204 

MONDIAL 157 158 042 043 081 112 

MYRYAD 276 293 

NAD 113 283 478 479 

NAKAMICHI 040 244 245 172 183 287 

NEC 176 

NIRO 343 

NILES 403 

ONKYO 017 046 108 080 209 275 

OPTIMUS 026 041 

Page 36 

OUTLAW 342 

PANASONIC 032 195 219 177 292 383 

PARASOUND 129 130 132 261 294 295 

333 334 

PHILIPS 249 250 251 063 119 805 

PIONEER 014 039 044 069 168 116 

035 078 198 480 

POLKAUDIO 515 

PROCEED 144 268 

RCA 010 048 117 156 067 288 

REALISTIC 019 056 073 075 095 

ROTEL 074 083 085 

RUSSOUND 379 391 392 

SAMSUNG 016 804 

SANSUI 040 048 110 119 065 228 

SANYO 047 

SCOTT 019 091 

SHARP 026 094 026 175 

SHERWOOD 024 102 106 447 

SIRIUS 555 

SONY 018 247 248 166 101 184 

218 271 369 372 380 800 

SOUNDESIGN 036 

SSI 068 

SUNFIRE 344 345 346 

TEAC 005 019 049 040 212 217 

TECHNICS 122 176 193 219 178 177 

200 257 262 

THETA DIGITAL 136 

TOSHIBA 060 087 198 278 

XM SATELLITE RADIO 515 

YAMAHA 026 253 169 067 173 264 

232 089 264 274 285 373 

803 

ZENITH 143 210 

SATELLITE Radios 

BRIX 555 

DELPHI 515 

POLKAUDIO 515 

SIRIUS 555 

SONY 380 

XM SATELLITE RADIO 515

Brand Code Numbers 

CD 


ADCOM 062 042 

AIWA 089 170 187 

AKAI 202 

AMC 231 232 

ARCAM 238 

AUDIO ACCESS 119 147 

AUDIO EASE 165 

AUDIO TECHNICA 046 

CALIFORNIA AUDIO 147 008 

CARVER 185 041 050 107 130 134 

135 138 139 203 204 167 

CREEK 159 

DENON 002 123 

EMERSON 042 

FISHER 050 185 134 008 

GENEXXA 010 

HARMAN KARDON 033 047 208 

HITACHI 042 175 

INKEL 130 

JCPENNEY 141 

JENSEN 158 

JVC 004 022 136 163 213 214 

242 243 

KENWOOD 185 007 023 055 071 072 

142 137 254 

KRELL 241 255 

KYOCERA 005 

LUXMAN 011 028 070 249 252 

MAGNAVOX 107 

MARANTZ 041 051 077 107 209 246 

MCINTOSH 212 247 

MEMOREX 010 

MISSION 107 

MITSUBISHI 179 

MONDIAL 147 


NAD 005 178 

NAKAMICHI 217 218 

NEC 062 

NIKKO 046 

NSM 107 

ONKYO 030 038 039 168 169 

OPTIMUS 010 050 081 

PANASONIC 147 172 008 068 248 

PARASOUND 233 240 

PHILIPS 041 107 246 

PIONEER 010 020 174 175 176 

PROCEED 239 

PROTON 107 

QUASAR 147 008 

RCA 017 042 150 

REALISTIC 042 050 051 187 

ROTEL 107 161 178 250 

SAE 107 

SANSUI 107 128 171 190 125 

SANYO 050 

SHARP 026 031 051 

SHERWOOD 051 096 112 115 119 166 

SIGNATURE 033 

SONY 048 081 097 126 133 177 

001(Default) 226 164 


SUMO 155 

SYLVANIA 107 

SYMPHONIC 052 

TANDY 010 

TEAC 051 052 233 079 

TECHNICS 147 172 184 008 068 

Page 37 

THETA DIGITAL 234 235 

VICTOR 004 022 

WARDS 185 033 

YAMAHA 024 046 054 186 183 245

VCR/DVR 


VCRs 

AIWA 034 

AKAI 043 

AMPRO 072 

ANAM 145 

AUDIO DYNAMICS 012 043 

BROKSONIC 129 

CANON 145 

CRAIG 003 135 

CURTIS MATHES 145 

DAEWOO 010 112 

DBX 012 043 

DYNATECH 034 053 

ELECTROHOME 059 

EMERSON 006 145 034 101 129 131 

153 

FISHER 003 010 008 

FUNAI 034 

GE 145 072 147 144 

GOLDSTAR 101 013 012 123 

HARMAN KARDON 012 

HITACHI 004 034 043 013 

INSTANTREPLAY 145 

JCL 145 

JCPENNEY 012 013 101 

JENSEN 043 

JVC 048 043 012 145 

KENWOOD 048 034 

LG 101 013 012 123 

LLOYD 034 

LXI 034 003 

MAGNAVOX 067 145 034 

MARANTZ 067 012 145 

MARTA 101 

MEI 145 

MEMOREX 101 003 010 145 034 053 

072 102 

MGA 059 

MINOLTA 013 

MITSUBISHI 059 013 

MTC 034 

MULTITECH 034 

NEC 012 043 048 

NORDMENDE 043 

OPTONICA 053 

PANASONIC 070 145 167 

PENTAX 013 145 

PHILCO 145 034 067 

PHILIPS 145 067 034 101 

PILOT 101 

PIONEER 013 048 

PULSAR 072 

QUASAR 145 

RADIO SHACK 123 

RCA 144 147 145 013 034 

REALISTIC 003 008 010 145 034 053 

101 

RICO 058 


SANSUI 043 048 135 

SANYO 003 010 102 

SCOTT 112 129 131 

SEARS 003 008 010 013 101 112 

SHARP 149 145 

SIGNATURE 034 

SONY 057 058 003 145 149 154 


STS 013 

SYLVANIA 145 034 059 067 

Page 38 

SYMPHONIC 034 

TANDY 010 034 

TATUNG 043 

TEAC 034 043 

TECHNICS 145 070 

TEKNIKA 145 034 101 

THOMAS 034 

TMK 006 

TOSHIBA 112 131 008 059 013 

TOTEVISION 101 

VECTOR RESEARCH 012 

VICTOR 048 

VIDEO CONCEPTS 012 034 

WARDS 003 013 145 034 053 131 

YAMAHA 012 034 043 

ZENITH 072 048 101 034 058 

TV/VCR Combos 

EMERSON 153 

FUNAI 034 

GOLDSTAR 101 123 

HITACHI 034 

JCPENNEY 101 

LG 101 123 

LLOYD 034 

MAGNAVOX 034 067 

MEMOREX 101 

PANASONIC 070 167 

PHILIPS 034 067 

RADIO SHACK 123 

RCA 034 

SEARS 101 

SONY 057 154 

SYLVANIA 067 

SYMPHONIC 034 

THOMAS 034 

ZENITH 034 

PVR, TIVO 

HUGHES 001(Default) 

HUMAX 001 

PHILIPS 001 

REPLAY NETWORKS 775 

SONY 804 805 

TIVO 001 

TOSHIBA 001

AUX 


PC & iPod Controls 

APPLE 401 412 476 

BOSE 409 

DLO 418 

GRIFFIN 471 

IPORT 419 

KENSINGTON 406 

SONACE 419 

TEN TECHNOLOGY 401 

MEDIA PC Controls 

DELL 001 262 

GATEWAY 001 262 

HAUPPAUGE 294 295 

HP 001(Default) 262 

KEYSPAN 297 

SONY 001 262 

TOSHIBA 001 262 

WINBOOK 001 262 

GAMING SYSTEM Controls 

MICROSOFT / XBOX 408 107 

SONY / PS2 414 

SONY / PS3 598 

AUDIO AUTHORITY / PS3 622 

LIGHTING Controls 

LITE-TOUCH 208 257 

LUTRON 158 159 077 

X-10 183 093 

D2A 

ARTEC 586 

CASTI 587 

CRAIG 588 

DIGITAL STREAM 609 

GRIDLINK 592 

INET ACCESS 589 

INSIGNIA 567 

LASONIC 592 

MAGNAVOX 584 

RCA 585 

SANSONIC 592 

TIVAX 589 590 

ZENITH 567 

ZENTECH 610 

ZINWELL 591 593 

Page 39


TV 


ABEX 025 

ADMIRAL 072 251 333 160 

ADVENT 247 

ADVENTURA 002 

AKAI 197 146 248 473 474 475 

405 

A MARK 112 143 

AMPRO 167 073 

AMSTRAD 052 

ANAM 043 054 056 080 112 

AOC 197 363 112 058 

APEX DIGITAL 006 591 

AQUAVISION 573 574 

ASTAR 477 

AUDIOVOX 076 

BELCOR 116 

BELL&HOWELL 333 072 

BROKSONIC 238 

BROCKWOOD 116 

CAIRN 201 

CANDLE 197 002 003 363 

CAPEHART 058 

CELEBRITY 001 

CENTURION 197 

CETRONIC 043 

CITIZEN 197 002 003 363 043 258 

103 143 

CLASSIC 043 

CLP CLASSIC 333 

COLORTYME 116 197 

CONCIERGE 073 

CONCERTO 363 

CONTEC 043 050 051 

CORNEA 116 

CORONADO 143 

CRAIG 043 054 

CROWN 043 143 

CURTIS MATHES 197 258 363 143 

CXC 043 

DAEWOO 363 043 076 103 127 143 

DAYTRON 363 143 

DELL 319 320 

DIGITAL PROJECTION 570 

DIMENSIA 333 

DREAMVISION 235 

DUKANE 011 025 

DUMONT 116 073 

DURABRAND 096 

DWIN 177 257 

DYNASTY 043 

DYNATECH 062 

DYNEX 399 

EIKI 187 

ELECTROBAND 001 

ELECTROGRAPH 470 

ELECTROHOME 143 024 076 196 

ELEKTRA 072 

ELEMENT 363 494 

EMERSON 028 048 043 155 005 197 

363 047 050 051 076 096 

143 151 153 154 

ENVISION 116 197 

ESA 323 

FISHER 007 057 

FUJITSU 198 246 346 

FUNAI 028 043 052 

FUTURETECH 043 

GATEWAY 242 268 

Page 40 

GE 160 144 165 073 197 008 

009 034 056 074 130 155 

333 363 

GEM 391 

GIBRALTAR 116 073 

GOLDSTAR 113 116 102 363 106 112 

127 143 

HALL MARK 363 

HAIER 164 363 

HANNSPREE 381 

HISENSE 419 442 

HITACHI 011 166 363 009 010 012 

023 075 143 158 072 250 

587 

HP 316 327 378 

HUMAX 518 

ILO 472 399 

INFINITY 164 

INFOCUS 330 333 547 548 532 

INTEQ 073 

INSIGNIA 350 354 457 399 164 454 

JANEIL 002 

JBL 164 

JCB 001 

JCPENNEY 363 024 197 008 009 030 

065 258 143 160 

JENSEN 013 

JVC 038 034 001 083 199 210 

240 406 581 

KAWASHO 116 001 197 

KEC 043 

KENWOOD 197 001 

KLEGG 470 

KLOSS 002 059 

KMC 143 

KONKA 457 

KREISEN 530 

KTV 043 197 143 154 

KURAZAI 072 

LG 113 116 102 106 112 127 

143 284 363 569 576 

LODGENET 072 

LOEWE 164 

LOGIK 072 

LUXMAN 363 

LXI 166 007 138 052 251 160 

164 

MAGNAVOX 164 059 197 003 060 061 

363 063 064 127 022 160 

094 226 467 

MAJESTIC 333 072 

MARANTZ 197 164 

MATSUI 164 

MAXENT 242 

MEGATRON 116 197 011 

MEMOREX 007 072 363 

MGA 197 363 024 028 042 

MIDLAND 333 073 

MINUTZ 008 

MITSUBISHI 109 124 024 363 028 040 

042 146 348 450 

MONTGOMERY WARD 333 072 

MTC 197 363 062 258 

NAD 138 025 

NEC 130 134 197 040 024 056 

019 237 262 272 575 577 

NET TV 202 

NIKEI 043


TV 


NIKKO 116 197 

NIKO 527 

NORCENT 390 

NUVISION 351 567 

OLEVIA 432 363 

ONKING 043 

ONWA 043 

OPTIMUS 025 

OPTONICA 019 251 

OPTOMA 265 270 249 

ORION 096 

PANASONIC 034 056 080 164 208 524 

583 

PHILCO 197 003 059 060 064 164 

363 024 056 063 

PHILIPS 164 005 093 038 197 003 

363 059 127 206 333 431 

594 

PILOT 116 

PIONEER 135 025 197 018 023 116 

234 272 374 393 

POLAROID 323 328 353 354 356 457 

494 505 

PORTLAND 363 143 

PROSCAN 144 160 333 165 167 

PROTON 363 112 058 143 171 172 

193 

PROTRON 498 499 392 398 

PROVIEW 494 

PROX 572 

PULSAR 116 073 

QUASAR 034 056 

RADIO SHACK 019 363 143 043 127 

RCA 160 165 065 144 197 363 

024 056 152 023 074 333 

588 

REALISTIC 007 019 043 047 

REVOLUTION HD 470 

RUNCO 072 169 178 179 180 181 

182 073 342 416 395 

SAMPO 197 058 363 202 

SAMSUNG 050 089 105 363 127 143 

160 228 229 258 578 

SAMSUX 197 

SANSUI 096 399 

SANYO 166 007 020 053 057 082 

187 

SCEPTRE 276 

SCOTCH 116 197 

SCOTT 028 043 363 048 143 497 

SEARS 138 030 363 007 028 057 

143 094 160 082 165 166 

SELECO 189 200 205 011 

SHARP 019 014 028 029 363 022 

143 175 251 308 496 

SHOGUN 116 

SIGNATURE 072 

SIMPSON 003 

SONY 001(Default) 147 185 085 

213 277 279 

SOUNDESIGN 028 363 003 043 

SOYO 528 

SPECTRICON 112 

SPECTRONIQ 499 

SSS 363 043 

SUPRA 116 

SUPRE MACY 002 

SUPREME 001 

Page 41 

SVA 328 

SYLVANIA 197 003 052 059 060 063 

064 164 160 127 593 

SYNTAX OLEVIA 333 144 160 376 432 363 

TANDY 251 

TATUNG 056 062 

TECHNICS 034 080 

TECHWOOD 363 

TEKNIKA 002 003 363 024 028 043 

072 258 143 

TELEFUNKEN 037 046 

TELERENT 072 

TERA 172 

TMK 363 

TOSHIBA 138 030 007 040 062 258 

325 

TOTEVISION 143 

TRUTECH 529 

UNIVERSAL 008 009 

VICTOR 038 

VIDEO CONCEPTS 146 

VIDIKRON 174 164 188 192 342 

VIDTECH 363 

VIEWSONIC 242 433 

VIKING 002 

VIORE 472 592 

VISCO 494 

VITO 363 

VIZIO 391 603 

WARDS 363 008 009 019 028 060 

061 063 064 072 074 143 

164 034 

WESTINGHOUSE 076 276 001 

YAMAHA 197 363 370 372 408 

YORK 363 

YUPITERU 043 

ZENITH 073 072 095 103 284 

ZONDA 112


AIWA 146 

AKAI 281 

ALPINE 098 

APEX DIGITAL 087 282 115 

BROKSONIC 130 

CINEVISION 091 

COBY 260 

CYBERHOME 271 

DENON 138 080 173 

DURABRAND 091 

DVD 2000 017 

EMERSON 091 143 

ESA 143 

FISHER 147 

FUNAI 143 

GE 027 

GO VIDEO 137 091 220 221 265 

GOLDSTAR 091 

HARMAN KARDON 084 140 

HITACHI 101 

ILO 268 

INITIAL 282 

INSIGNIA 143 

INTEGRA 142 338 

JBL 084 

JVC 012 

KENWOOD 151 

KISS 279 

KLH 135 

KRELL 104 

LEXICON 148 

LG 091 057 

LITEON 264 265 

MAGNAVOX 001 096 143 282 

MALATA 267 

MARANTZ 083 095 

MERIDIAN 153 

MICROSOFT 027 

MINTEK 282 



NAD 088 

NAKAMICHI 103 

ONKYO 076 141 142 338 

OPPO 266 341 

OPTIMUS 107 

ORION 130 

PANASONIC 042 138 144 150 285 

PHILIPS 001(Default) 083 095 166 

344 

PHILIPS-MAGNOVOX 141 001 

PIONEER 023 092 099 107 108 131 

304 

POLAROID 233 

POLK AUDIO 141 001 

PROSCAN 027 

RCA 027 

RJTECH 269 

SAMSUNG 056 165 170 137 159 275 

SANSUI 130 

SANYO 147 

SEARS 130 

Sensory Science 265 

SHARP 094 

SONY 033 118 145 126 191 286 

242 243 343 

SUPERSCAN 143 

SV2000 143 

DVD 

Page 42 

SYLVANIA 143 

SYMPHONIC 143 

TATUNG 102 

TEAC 107 

TECHNICS 042 

TECHWOOD 088 

THOMPSON 027 

TOSHIBA 130 141 164 188 273 

VENTURER 149 

X-BOX 027 

YAMAHA 042 089 166 138 197 334 


BLU-RAY & HD DVDs 

LG 091 

PANASONIC 285 

PIONEER 304 

SAMSUNG 275 

SONY 286 

TOSHIBA 273 

DVD Recorders 

CYBERHOME 271 

GO VIDEO 220 221 265 

ILO 268 

KISS 279 

LITEON 265 

PANASONIC 138 

SENSORY SCIENCE 265 

SONY 191 

TOSHIBA 188 

TV/DVD Combos 

AIWA 146 

AKAI 281 

DURABRAND 143 

ESA 143 

FUNAI 143 

INSIGNIA 143 

MAGNAVOX 282 

MINTEK 282 

SAMSUNG 165 

SV2000 143 

SYLVANIA 143 

SYMPHONIC 143 

TOSHIBA 130 

TV/DVD/VCR Combos 

EMERSON 143 

INSIGNIA 143 

MAGNAVOX 143 

PANASONIC 144 

SUPERSCAN 143 

SYLVANIA 143 

TOSHIBA 164 

DVD/VCR Combos 

GO VIDEO 137 

PANASONIC 150 

PHILIPS 001 

(VCR Functions for VCR 067) 


SANSUI 130 

SONY 145 191 

TOSHIBA 141 

ZENITH 091 

(VCR Functions for VCR101)


CABLE BOXES 

ABC 004 042 053 

ADB 315 254 255 259 

ADELPHIA 001 074 

ADVANCED NEWHOUSE 001 

ALTRIO 001 

AMERICAST 099 

AMINO 256 257 260 261 

ARMSTONG 074 

AT&T BROADBAND 074 035 

ATLANTIC BROADBAND 001 074 

BELL SOUTH 099 

BLUE RIDGE 001 074 

BRESNAN 074 

BRIGHT HOUSE 001 110 

BUCKEYE COMM 074 

CABLEVISION 001 074 108 

CHARTER 001 074 

CISCO 001 041 042 045 313 035 

356 

COGECO 074 

COMCAST 001 074 110 313 

COMSAT 074 

COX DIGITAL 001 074 

DIGEO 111 

EAGLE 020 030 

EASTERN 057 

ENTONE 316 258 

GEMINI 008 

GENERAL INSTRUMENT 074 104 

GNC 099 

GOLDEN CHANNEL 030 

HAMLIN 049 055 

HITACHI 055 

INSIGHT 074 

JERROLD 074 004 002 008 009 010 

069 

MAGNAVOX 010 012 

MASSILLON 074 

MEDIACOM 074 

MOTOROLA 074 110 148 111 112 036 

MOXI 111 252 086 

MYRIO 254 255 

NCTC 074 

NOW TV 314 

NSC 015 038 

OAK 031 053 

PACE 001 074 110 313 


PHILIPS 006 012 013 020 085 

PIONEER 001(Default) 034 051 063 

105 

QUEST 112 

RCA 047 

RCN 074 

REGAL 049 

REGENCY 057 

RODGERS 001 

SAMSUNG 030 

SCIENTIFIC ATLANTA 001 041 042 045 035 

SEREN 001 

SERVICE ELECTRIC 074 

SHAW 074 

SIGECOM 001 

SONY 108 

SPRUCER 047 

STARCOM 002 004 008 009 

STARGATE 008 030 104 

CABLE/SAT 

Page 43 

SUSQUEHANNA 001 074 

TELNET 154 

TIME WARNER 001 074 

TOCOM 056 

UNITED CABLE 004 053 

VERIZON 110 

VIDEOTRON 001 

VIEWSTAR 012 015 

WEGENER 250 

WIDE OPEN WEST 001 099 


SATELLITE RECEIVERS 

CABLEVISION 148 

DIRECTV 173 

DISH NETWORK 122 

ECHOSTAR 122 

EXPRESSVU 122 

GENERAL ELECTRIC 116 150 

GENERAL INSTRUMENT 148 

GOI 122 

HITACHI 139 140 

HTS 122 

HUGHES 114 

JVC 122 

LG 170 


MOTOROLA 148 

NEXT LEVEL 148 

NFUSION 192 


PHILIPS 152 153 156 114 

PROSCAN 116 150 

RADIOSHACK 148 

RCA 116 150 

SAMSUNG 155 163 169 175 

SKY 164 

SONY 115 

STAR CHOICE 148 

TOSHIBA 127 114 158 

VOOM 148

Frequently Asked 

Questions 

If the batteries run out, will I 

lose my settings? 

No. The WR7 stores all of your settings in nonvolatile 

FLASH memory. You could remove the 

batteries for months, replace them at your convenience, 

and the WR7 would still remember 

your settings. 

What is MacroPower? 

MacroPower is a very useful way to make a lot 

of things happen with one button push. For 

example, in most home theaters, to watch television, 

the user must turn on the TV, then turn on 

the Cable Box or the Satellite Receiver, then turn 

on the Surround Sound system for sound. 

Instead of pressing all of those buttons one at a 

time, MacroPower enables you to turn on all of 

these components, in the sequence you want, 

with one button push. For more information on 

why and how you should program MacroPower 

commands, refer to page 21 in this Manual. 

What if my remote control no 

longer works from a distance? 

Replace the batteries with new Alkaline batteries. 

Who can I contact for more 

answers? 

The Universal Remote Control technical support 

and customer service staff are ready to answer 

any questions you might have. 

E-Mail us at techsupport@universalremote.com 

Visit our website www.universalremote.com 

Call us at (914) 835-4484 

Monday - Friday, 9AM to 6PM (EST) 

Page 44

USA Limited 

Warranty 

UNIVERSAL REMOTE CONTROL, INC. warrants 

this product against defects in material or 

workmanship for a period of one (1) year and 

as set forth below. Universal Remote Control 

will, at its sole option, repair the product using 

new or comparable rebuilt parts, or exchange 

the product for a comparable new or rebuilt 

product. 

This warranty not does apply to 

the following: 

• Units purchased from unauthorized resellers. 

• Units purchased second-hand (used). 

• Units installed or deployed for rental or commercial 

use. 

• Damage caused by misuse, neglect, or acts of 

nature. 

• Products that have been modified or incorporated 

into other products. 

• Products purchased more than 12 months ago. 

Specifications 

Learning Capability 

................................80 buttons for any component 

Macro Capability 

..........................13 Macros of up to 20 steps each 

Non-Volatile Flash Memory 

...............................................................64 KByte 

IR Range (Line of Sight via Infrared) 

....................30--50 feet, depending on operational 

environmental conditions 

Weight .............................6.9 oz. (with batteries) 

Size ...................2 1/8”W x 8 3/4”H x 1 1/8”D 

Batteries......Two AA Alkaline batteries (included) 

Page 45

MEMO 

Page 46

MEMO 

Page 47

MEMO 

Page 48

MEMO 

Page 49

MEMO 

Page 50

MEMO 

Page 51

500 Mamaroneck Avenue, Harrison, NY 10528 

Phone: (914) 835-4484 Fax: (914) 835-4532 

www.universalremote.com 

OCE-0085A Rev 02 

The Pioneer in Control Technology

Owner's Manual - Universal Remote Control

Create successful ePaper yourself

Delete template?

Save as template?